Lab Akademi Soru&Cevap Platformu

Kullanıcı: jiejiankang

Üyelik zamanı: 2 yıl (22, Ekim, 2021)
Tür: Kayıtlı kullanıcı
Tam adı:
Yer:
Site Adresi: http://www.fectgroup.com/metal-flexible-hose/
Hakkında: Flexible Metal Hoses: An essential guide

A metal flexible hose is a type of piping used to connect two distant points to transport or transfer fluid. In Oil & Gas applications hoses are used when there is a considerable relative movements. A variety of fluids and fluidized solids can easily be transferred through flexible hoses to other locations. These are most commonly known as hosepipe. Along with loading and unloading services in processing plants, these are widely used by homeowners as garden hose. Normal Flexible hoses are made of non-metals like soft plastic material or synthetic rubber. However, flexible hoses of chemical industries that are designed to absorb pipe movements are made of metallic materials.


Flexible hoses are moade by extrusion or vulcanization process. To add strength to the non-metallic flexible hoses, they are reinforced using a crisscrossed grid of fibers combined together through braiding, spiraling, or knitting. These reinforced hoses can be long enough. Basically, flexible hoses have four parts; inner tube, reinforcement, End fittings and protective outer cover.


A corrugated hose is constructed with a bellow of very long length. Fundamentally, the behavior of a corrugated flexible hose is the same as the bellow expansion joint. The flexible hose has to resist the hoop pressure stress, but cannot sustain the longitudinal pressure stress. Also, it has a tendency to squirm under internal pressure. To resist the longitudinal pressure stress and prevent squirm, corrugated hoses are often constructed with braids wrapping around the outside surface as shown in Fig. 4. The braided cover also protects the corrugation from scratch and wear. The braided hose, similar to a tied expansion joint, cannot accommodate any axial movement. On the other hand, the un-braided hose can sustain very small internal pressure.


Due to the lack of a limiting mechanism, a corrugated tube connector metal flexible hose is prone to abuse. It should not be bent beyond its acceptable range. For braided hoses, the situation is even more critical.

jiejiankang kullanıcısına ait istatistikler

Puanları: 100 puan (172. sırada)
Soruları: 0
Cevapları: 0
Yorumları: 0
Oyları: 0 soru, 0 cevap
Verdiği Oylar: 0 artı oy, 0 eksi oy
Aldığı Oylar: 0 artı oy, 0 eksi oy

jiejiankang'in duvarı

230 soru
139 cevap
21 yorum
1,145 kullanıcı